General Types Of Tyre Damage That You Should Learn About

pexels photo 244207

Road impacts are the primary reason why most tyre damage tends to occur and thereby leads to premature tyre replacements. According to reports, impact damage accounts for 1/5th of all typical tyre replacements, especially where tread wear is not the major reason. Cut in the sidewall or tread along with punctures form as the other two major reasons for early tyre replacements. 

There are also various other reasons why you’d want to purchase a new car tyre, such as:

  • Vibration when moving at higher speeds.
  • Sloped wear & tear of vehicle tyres. 
  • Quick wear & tear of tyre tread. 
  • Deflation or inflation damage.
  • Damage due to fitting. 
  • Age of the tyre. 

There’s no doubt that a premature tyre replacement will not only cause unnecessary hassle for you but also create an additional burden on your pocket. Hence, you must carry out some common checks regularly, so that you can easily detect tyre damage beforehand.

The Varying Types Of Tyre Damages That You Should Know About

1. Lumps, Bulges & Cuts In The Tyre

According to a reliable service provider for wheel alignment in Auckland, bulges usually take place when your tyre sidewall has been damaged. Sidewall damage can happen due to large potholes or kerbing impacts on the roads. 

Sidewall damage can easily harm the structural integrity of your vehicle tyre. This is because once the tyre sidewall gets damaged, it can no longer sustain internal air pressure, which leads to the creation of the bulge. 

In the above-mentioned scenario, replacing or repairing your tyre is the only solvable method. Thus, if you notice a lump, bulge or cut on your SUV tyre, you should get the same checked at a nearby tyre shop. Tyres having damaged sidewalls are unsafe for driving and will need immediate replacement. 

2. One-Sided Or Sloped Tyre Tread Wear

In case you’re unaware then you must know that wheel alignment plays a massive role in maintaining your tyre’s health. This is because if the wheels are not aligned perfectly, then you’ll easily witness sloped or one-sided wear & tear of tyres. Furthermore, misaligned tyres can also lead to lower fuel efficiency because the resistance of your axle will increase. 

It should be known that one-sided or sloped tyre wear is very difficult to notice, especially if the wear happens on the inner side of the tyres. Moreover, if your vehicle has wider tyres, then such wear becomes even more challenging to detect.

Thus, as a responsible vehicle owner, you should make a habit of checking your tyres for any sloped or one-sided wear.

3. Punctures

Punctures take place when any sharp object penetrates the outer wall of your tyre. Punctures can occur due to loose screws, nails, shards of glass or cracks on the road surface. In case the puncture-causing object enters your tyre deep enough, then it can lead to a loss in overall air pressure inside the car tyre. Loss of tyre pressure can lead to loss of grip thereby leading to decreased handling on the road. 

Punctures generally take place in two types – rapid & slow punctures. Slow punctures lead to tyre deflation over an extended period. Alternatively, rapid punctures inhibit your ability to drive on the road because the tyre loses air pressure quickly. 

Lastly, for more suggestions, be sure to contact us at any time. We’d be pleased to assist you without any issue. 

Total Views: 160 ,
By Michael Caine

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts

  • Best Cell Service in Alaska

  • The 2023 Escalade Is Cadillac’s Past and Present, But Not Its Future

  • THE DRIVERLESS CAR DILEMMA

  • EXPLORE DIFFERENT CAR BATTERIES