Sure, you got a home inspection due in two weeks and you need to get your home ready, right? Fair enough, and one of the essential steps you need to take first is to assess your home for various faults and repairs you need to get fixed before the inspector gets there. After all, you are aiming to upsell your home, and you would require a good inspection report to back it up. Chances are that as you survey your home, you are bound to find various faults, repairs you need to get remedied right away. And you are bound to find black mold as well. And if you are planning to remove it on your own, then you would need to check out the remainder of the post.
- Locating it: You need to get your home ready for the home inspector in Edmonton and that means a complete overhaul, in a sense. That includes getting the black mold removed. But before you jump in, you need to know that black mold is inherently dangerous to humans and can impact your health, as you breathe in the spores. And that’s why you need to take safety measures to avoid breathing in the spores. But before that, survey your home from top to the basement, check for imminent signs of black mold. Usually, if the room in question is prone to leaks or contains too much moisture, chances are that black mold is already present. Sure, you may not be able to see it on the walls, but that does not mean it is not there. It could well hide in cracks and even beneath the tiles. Assuming that it’s not there just because you cannot see it, is a rookie mistake that most DIY homeowners generally make.
- Use the right chemicals: Attempting a DIY mold removal on your own is risky enough, but it would be better if you attempt to do so after some serious research. For example, professional contractors tend to remove mold by utilizing the right chemical solutions to remove it. So make sure that you first find out what chemicals to use to remove all traces of mold completely, from your home. Better yet, if you are unsure, consult a professional.
- Not wrapping it up: One of the mistakes most homeowners often commit is the assumption that just because they have removed all the visible traces, the mold is gone. If it were only that simple; you need to check beneath the windowsill as well as the tiles on the floor. You also need to use chemicals to sanitize the area, until you are sure that the mold has all but disappeared. And above all, make sure that the room, remains free of any residual moisture as well.
- Spreading it everywhere: Again, this is a rookie mistake, one often committed by eager homeowners. Sure, you are anxious to clear your home inspection. But that does not mean that you need to spread the spores all over your home, right? Remember mold spores can easily become airborne and will spread, to areas where there’s some moisture. To prevent this, you would need to seal off the area you are working on, to contain it. And then you can proceed with the mold removal.
- Painting it over: It should be obvious that mere paint is not going to resolve this problem. Not even if the paint is alleged to be resistant to mold. Let’s say that you remove the visible traces of mold, and attempt to paint it over. The mold in question would continue to grow beneath the paint and will soon spread over the rest of your home. You need to remove the mold completely before you attempt to give the room a fresh coat of paint.
These are some of the essential pointers you need to review before you attempt any DIY mold removal on your own.